|
X-10 PAM01 2 Pin Appliance Module
The AGC Appliance Module incorporates an advanced X-10 powerline circuit
design which
allows the module to operate in adverse environments. The principal
advantages are greater
sensitvity and better noise rejection. These modules are recommended for
all installations where
reliability of operation is paramount.
The AGC Appliance Module is designed to control loads with the following
ratings:
Resistive load 15A
Motor load 1/3 HP
Incandescent load 500W
TV/Stereo 400W
The module is available in two plug formats: two-pin (PAM01) and three-pin
grounded (PAM02).
Setting up the Appliance Module
• Set the Unit Code dial to an unused code which can be controlled
from the Security Remote,
PSR01, when using the X-10 PRO2000 Security Panel (switches 1-4 control
Unit Codes 1-4) or
any other desired controller.
• Plug an appliance into the Appliance Module and plug the Appliance
Module into a convenient
AC outlet.
Local control
The Appliance Module includes circuitry to sense the appliance's own
on/off switch to turn the
appliance on locally. To switch the appliance on, turn the appliance's
switch off then on again.
|
