|
New Page 1
CC01 Low Current Closet Light Controller Surface Switch Version
-
U.L. Listed
-
Designed For Lamp Switching (60 Watt Max)
-
Use For Walk-in Closets, Pantries and Cabinets
-
Automatic AC Voltage Switching System
-
Monitors the State of a Low Voltage Switch Connected to
the Door
-
Surface Mini N/O Switch And Magnet Included
The Current Controller is an encapsulated circuit with connecting wires to AC
power, a light fixture and door monitor switch. The device uses a Lithium
battery to supply power to a microprocessor circuit that is safely isolated from
the 120 volts AC. The low-level battery voltage is used as a control signal to
the door monitor switch. This control signal through the door switch will then
control the AC power to the light fixture. The Current Controller is designed to
fit into an electrical junction box along with the connecting wires.
NOTE: Open Loop Switch required.
SPECIFICATIONS:
Maximum Input Voltage 125 VAC
Maximum Output Current 800 mA
Maximum Output Power 100 VA
Recommended Output Load 60 VA
Door Switch Voltage 3 VDC
Door Switch Current 3 uA
CAUTION: Remove branch
power before installing CC-01.
Run light fixture wires from the light fixture to the electrical
junction box. Run electrical wires from branch
circuit to the electrical junction box. Connect the white zip wire from CC-01 to
the door switch wires using
the supplied blue wire connectors. Connect the red wire from CC-01 to the hot
wire of the light fixture. The
other light fixture wire is connected to neutral using the supplied wire
connectors. Connect the black wire
from CC-01 to the electrical hot wire from the AC branch using the supplied
yellow wire connectors. After all
the connections have been made, the CC-01 can be placed into the electrical
junction box. Secure the box
lid and reapply power to the branch circuit.
NOTE: Open Loop Switch
Required (included). Install the switch on the door, according to the
manufacturers
installation instructions. Run wires from the door switch to the electrical
junction box.
WARRANTY:
One year warranty against workmanship, material and factory
defects
|
