|
Specifications:
- Switch is U.L. listed.
- 1 Amp Max at 24 VDC.
- Recommended < 250ma.
- 24 inch lead wires (20 AWG)
- Operating temperature not to exceed 90 deg. Celsius.
Installation:
- Mount float slightly above point where the water level activates
the sump pump.
- Connect electrical leads to the applicable circuit.
- Use of a water-tight splice is
recommended.
- Test to insure proper operation.
- To change circuit from N.C. to N.O., remove "C" clip,
reverse float, reinstall "C" clip.
- When connecting to an inductive load an arc suppression device
should be put in parallel with the load to avoid damaging the switch.
|
Features:
- Low cost.
- Simple construction.
- High reliability design
- Made of non-corroding plastic materials.
- Stainless steel hose clamp for easy mounting.
- Sealed reed switch provides high isolation when pump wiring breaks
down.
- Will operate totally submerged.
- Unique reversible float allows for N.O. or N.C. switch circuit.
- Fits virtually all sizes and types of return pipes.
|
