|
Ademco Vista 20I P REV-5 6270 Kit
Kit Includes:
1-Vista-20P REV-5.2 Control
1-6270 Graphic Keypad
1-12V 4.5AH Battery
1-Transformer
All Manuals
No Charge On Site Programming
6270 Touch Display Keypad Manuals
Installation
Manual
Install
Readme
User Manual
Vista 20P
Installation Instructions
Vista 20P Program Instructions
Vista 20P User
Instructions
Also
See Ademco 5800 Series Wireless Equipment & Accessories.
NOTE: The Vista 20PS - 20P Rev 3.0 5.0 5.1 is Discontinued.
The Newest NO BUGS IS THE Vista 20P REV-5.2. All 6270 Graphic Keypads Now Use Vista 20P REV 5.2
6270 Graphic Display Keypads Work Fine For Programming On The Rev 5.2
As We Ship Factory Direct You Will Be Assured To Get The Rev 5.2
The VISTA-20P Revision 5 and up is an eight-forty eight zone control panel
specifically designed to support ADEMCO’s intuitive graphical user interfaces. The
graphic user interfaces provide homeowners with the easiest way to operate their security
system and take advantage of home management features.
Features
Eight on-board hardwire zones standard (15 when Zone Doubling feature
is used)
Expandable to 48 total zones when used with hardwired and/or wireless
expansion modules
Wireless keys can be programmed without using zones
16 output devices
– Relays (Model 4204 Relay Modules, or 4229 Expansion Module), and/or
– X-10® devices (when used with a 4300 Transformer)
Two low current on-board trigger outputs
100 Event Log viewable at system keypads with time/date stamp
48 system user codes assignable to either partition
Two independent partitions plus a common partition
– Global Arming from any system keypad
– Goto function to view or operate one partition from the other
– Separate partition account numbers
Four installer configurable zone types allows the installer to create
custom zone types by assigning all zone attributes
Multiple actions on output devices depending on system
"state"
– Turns lights off when system arms
– Turns the same light on when system disarms
– Flashes same lights when system is in alarm
Built-in phone line cut monitor with programmable delay and
annunciation options
– Display on system keypads
– Trigger local sounders
– Trigger system bell
Supports four-wire, and up to 16 two-wire smokes
– Works with Sentrol CleanMe™ maintenance signal
Valuable End User Features
Compatible with ADEMCO’s Graphic User Interfaces
Now viewable on system keypads:
– Exit countdown
– Time and date display*
– Event log*
Auto keypad backlighting on entry
Keyswitch arming
Programmable macro buttons and single-button arming
A variety of wireless remote controls for single-button operation
User Scheduling
– Automatically activates X-10 and relays at programmed times
– Latchkey reports to pagers
– Auto arm/disarm
– "User access" time windows
Supports up to four end user numeric pagers
VIP Module allows system control from any touchtone phone
Chime by zone
Security Dealer Features
False alarm prevention features to help reduce false alarms
Automatic System Load Shed
– During extended AC power fail, the system battery will be disconnected to prevent
irreversible battery failure. Reduces service calls to replace batteries
Dynamic Signaling
– Reduces redundant reporting to the central station when multiple reporting methods
are used; i.e. digital dialer and AlarmNet radio
*Requires custom alpha keypad
Specifications
Electrical
Aux. power 12VDC, 600mA maximum
Seven hour standby at 400mA aux. load with four amp hour battery
16.5VAC/25VA transformer 50 & 60 HZ Programmable.
Alarm output 12VDC, 2.0 amps maximum
For UL installations, combined aux. and alarm output cannot exceed
700mA
Output Control
Zones
Eight hardwired zones (15 with zone doubling)
Selectable response 10msec, 350msec, 750msec
Assignable to any partition
20 selectable zone types plus four configurable zone types
Programmable swinger suppression
Expansion Devices
4219 – Eight hardwired zones – 16mA
4204 – Up to four relays – 15mA standby (each active relay
draws an additional 40mA)
4229 – Eight hardwired zones and two relays – 36mA (each
active relay draws an additional 40mA)
Accessories
4286 VIP Voice Module – 220mA
5881ENL RF Receiver supports up to eight zones – 60mA, 5881ENM
supports up to 16 zones – 50mA, 5881ENH up to 40 zones – 50mA
5883 Transceiver supports up to 40 zones – 80mA
Supports Eagle 1225 and 1221 boards
Keypads
6160 Custom English (required for programming) – 150mA/40mA (6160)
130mA/40mA (6139)
6270 Graphic Touch Screen Keypad Up To 4. (not recommended for
programming.)
6160V Custom English with voice – 150mA/40mA (can be used for
programming)
6160RF Custom English With Built In High Transceiver (5883H) (can be
used for programming)
6148 Fixed English LCD – 70mA/30mA
6150 Fixed English LCD – 70mA/40mA (6150), 40mA/20mA (6128)
6150RF Fixed English LCD with built-in receiver 105mA/80mA
6150V Fixed English LCD with voice 70mA/40mA
Agency Listings
Smoke Detectors
Communications
Touchtone or pulse
Formats supported
– ADEMCO Contact ID
– ADEMCO 4 + 2 Express
– ADEMCO low speed
– Sescoa/Radionics
3 + 1, 4 + 1 and 4 + 2 reporting
Reporting capabilities
– Split
– Dual
– Split/Dual – True dial tone detection
Low battery reports 11.2 – 11.6VDC
AC loss and restoral reporting supported
|
